Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES
Choose a sub category:
CHAIN - PROOF COIL CHAIN - TWIST LINK CHAIN - JACK
CHAIN - TWIN LOOP CHAIN - SPECIALTY GRAB HOOKS
SLIP HOOKS SHACKLES CHAIN - LAP LINKS
CHAIN - QUICK LINKS CHAIN - SNAP LINKS CHAIN - SWIVELS
CHAIN - CLEVIS LINKS SPECIALTY FARM HITCH PINS
ANCHOR SHACKLES CLEVISES & PINS SNAPS
WELDED RINGS CHAIN HOISTS LOAD BINDERS
POWER HOISTS ROLLER CHAINS & PARTS
Sort By:
1 2 3 ... 26
Speeco 07090100/2702 Standard Tractor Lynch Pin Speeco 07091900/3548 Standard Tractor Lynch Pin National Hardware 3152BC Lap Link
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. National Hardware Lap Link, Series: 3152BC, 3/16 in, Steel, Zinc Plated, 225 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain
SHUT COLD ZINC PLATED 3/16IN  Speeco 07090400/2704 Standard Tractor Lynch Pin National Hardware 3152BC Lap Link
Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. National Hardware Lap Link, Series: 3152BC, 1/8 in, Steel, Zinc Plated, 120 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain
Campbell T7665012 Welded Ring Campbell T5950124 Repair Lap Link QUICK LINK ZN 3/16
Campbell Welded Ring, 1 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit. Factory number indicated thickness (inches).
Fehr Bros 3/16 Anchor Shackle National Hardware 3155BC Ring SPRING SNAP STEEL ZN 3/16
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. National Hardware Ring, Series: 3155BC, NO 4 X 1-1/4 in, Steel, Zinc Plated, 270 lb Load Capacity, For Rope, Chain and Strap WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device.
Fehr Bros 1/4IN Anchor Shackle Speeco 07090800/2698 Tractor Lynch Pin National Hardware 3153BC Cold Shut
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. National Hardware Cold Shut, Series: 3153BC, 1/4 in, 0.24 in Rod Diameter, 0.26 in Hole Diameter, Steel, Zinc Plated, 1250 lb Load Capacity, 1.61 in Width, For Use to Couple Chain Attachments
National Hardware 3152BC Lap Link National Hardware 3155BC Ring Speeco 07091500/2709 Standard Tractor Lynch Pin
National Hardware Lap Link, Series: 3152BC, 1/4 in, Steel, Zinc Plated, 500 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain National Hardware Ring, Series: 3155BC, NO 7 X 1 in, Steel, Zinc Plated, 195 lb Load Capacity, For Rope, Chain and Strap Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
Campbell T4900324 Cold Shut Campbell T4900424 Cold Shut Campbell T7665032 Welded Ring
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Campbell Welded Ring, NO 7 Chain, 1-1/4 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity
National Hardware 3153BC Cold Shut National Hardware 3155BC Ring National Hardware 3155BC Ring
National Hardware Cold Shut, Series: 3153BC, 5/16 in, 0.32 in Rod Diameter, 0.35 in Hole Diameter, Steel, Zinc Plated, 1900 lb Load Capacity, 1.94 in Width, For Use to Couple Chain Attachments National Hardware Ring, Series: 3155BC, NO 3 X 1-1/2 in, Steel, Zinc Plated, 300 lb Load Capacity, For Rope, Chain and Strap National Hardware Ring, Series: 3155BC, NO 7 X 1 in, Steel, Brass, 195 lb Load Capacity, For Rope, Chain and Strap
Baron 1407 Open Eye Spring Snap National Hardware 3156BC Ring RING BRASS NO4X1-1/4IN
Baron Spring Snap, Open Eye, 9/32 in Snap Opening, 3-3/8 in Overall Length, Steel, Nickel Plated National Hardware Ring, Series: 3156BC, 1 in, Solid Brass, 195 lb Load Capacity, For Rope, Chain and Strap National Hardware Ring, Series: N244, Suitable For Use With: Connecting Rope, Chain or Strap, NO 4 x 1-1/4 in, Steel, Brass, 270 lb Load Capacity
BREACHING SNAP ZN 2-1/2       Campbell T7661152 Welded Ring Midland Big Orange 081163/MC645G Anchor Shackle
. Campbell Welded Ring, NO 3 Chain, 2 in Length X 0.24 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1
   
 
1 2 3 ... 26