Home > PLUMBING > ROUGH PLUMBING SUPPLIES > TUBING
Choose a sub category:
POLYETHYLENE TUBING PEX TUBING FLAIR IT TUBING
VINYL TUBING RUBBER TUBING
Sort By:
1 2 3 ... 6
Conbraco APPW512 Apollo Conbraco APPW1012 Apollo Conbraco APPW534 Apollo
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
Flair-It 16050 Flexpex Pex Tubing Flair-It 16051 Flexpex Conbraco APPW51 Apollo
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded. Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded. Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
Conbraco APPW1034 Apollo Conbraco APPB2012 Apollo Conbraco APPR2012 Apollo
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
Flair-It 16052 Flexpex Pex Tubing Abbott Rubber 9001P-200 Lightweight Non-Toxic Tubing PlumbPak PP855-21 Tubing
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded. For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, light weight, and resistant to stress cracking, it forms a solid barrier to gases, vapor, and moisture. 1/4" x 25' poly tubing.
Conbraco APPB2034 Apollo Conbraco APPR2034 Apollo Abbott Rubber 7101P/PSVTR32-200 Lightweight Tubing
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps.
Conbraco APPOB2512 Apollo Spartan 20010 Lightweight Flexible Pipe Abbott Rubber 9002P Lightweight Non-Toxic Tubing
Designed to prevent diffusion of oxygen into hydronic radiant heating systems. A layer of polymer is laminated to the outside surface which is highly resistant to the passage of oxygen. Oxygen Barrier PEX tubing is good for hydronic radiant heating, cooling, and snow melting systems using water or water/glycol mix. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring, or behind wallboard or plaster. Oxygen Barrier PEX tubing may also be used as transfer lines for baseboard heating systems with a maximum operating temperature of 200 Deg F at 80 psi. Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less. For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, light weight, and resistant to stress cracking, it forms a solid barrier to gases, vapor, and moisture.
Conbraco APPW538 Apollo Spartan 20020 Lightweight Flexible Pipe Abbott Rubber 7001P Lightweight Tubing
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less. FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps.
Cresline 18205 Flexible Pipe PIPE POLY 160LB 1/2IN X 100FT Cresline 18335 Flexible Pipe
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
Cresline 18105 Flexible Pipe Abbott Rubber 7002P/PSVTR52-100 Lightweight Tubing Abbott Rubber 9003P/PSPTR6-100 Lightweight Non-Toxic Tubing
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, light weight, and resistant to stress cracking, it forms a solid barrier to gases, vapor, and moisture.
Spartan 20030 Lightweight Flexible Pipe Cresline 18515 Flexible Tubing Conbraco APPB10012 Apollo
Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less. For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high density, manufactured from select resins. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.AWWA C-901 Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
   
 
1 2 3 ... 6